Zinc Anode 620 Datasheet «1080p 2024»

Steel must be abrasive blast cleaned to a minimum standard of Sa 2½ (ISO 8501-1) with a surface profile of 50–75 microns . Application Methods:

Primarily for touch-ups or small, difficult shapes. Multiple coats may be needed to achieve the target DFT. Drying Times (at 25°C): Touch Dry: 20 minutes. Hard Dry: 6 hours. Minimum Overcoating Interval: 12 hours. 4. Major Applications

Zincanode 620 is the industry standard for protecting heavy-duty steel assets, including: zinc anode 620 datasheet

Use a tip size of 0.43–0.53 mm and a pressure of 130–180 kg/cm².

Below is a detailed technical overview based on the standard Berger Zincanode 620 datasheet . Steel must be abrasive blast cleaned to a

Contains more than 80% zinc by weight in the dry film, ensuring high electrical conductivity for galvanic protection.

The Zincanode 620 stands out due to its high metallic zinc content and rapid curing capabilities. Drying Times (at 25°C): Touch Dry: 20 minutes

Capable of withstanding dry heat up to 150°C (302°F) .

The is a high-performance, two-part epoxy zinc-rich primer specifically engineered to provide superior cathodic protection for steel structures in highly corrosive environments. Often categorized by the keyword "zinc anode 620," this product functions as a "sacrificial" coating, protecting the underlying steel from rust even if the film is damaged.