Xprinter Xp420b Wifi Setup ((free)) < Top >

: Open the Diagnostic Tool (e.g., version 1.028). Set the interface to USB and click Get Status . The indicator should turn green if the connection is active.

: Click Set to save these settings to the printer's memory. You can now disconnect the USB cable. Option 2: Using Wi-Fi Direct (AP Mode)

: Required for the initial configuration of network settings via USB.

: To bridge the connection during the initial setup. Network Details : Your local Wi-Fi name (SSID) and password. Software : The Diagnostic Tool and Standard Drivers . Option 1: Connecting to Your Wi-Fi Network (STA Mode)

: Connected to power and loaded with label stock.

: On your mobile device or laptop, search for available Wi-Fi networks and select the one named after your printer (e.g., XP-420B ). Default Password : Use the default password 12345678 .

Настройка WI-FI принтера этикеток Xprinter XP-420B

: Select your network from the list, enter your Wi-Fi password, and click Conn or Connect .

Setting up the Xprinter XP-420B for wireless printing streamlines your labeling workflow by removing the need for a physical connection to your computer or mobile device. This versatile 4-inch thermal label printer can be configured as a network device or through a direct wireless connection. Before you begin, ensure you have the following: