Xml File For Sp Flash Tool Link [2025-2026]

Open the SP Flash Tool v6 executable as an administrator on your PC.

Navigate to the "Download" tab. Look for the "Download-XML" field and click the "Choose" button. Browse to your firmware folder and select the flash.xml or device-specific XML file.

While older SP Flash Tool versions (v5 and below) rely exclusively on .txt scatter files, Version 6 requires a flash.xml or similar XML file to load the firmware. xml file for sp flash tool

The safest mode for most users is "Download Only." Avoid "Format All + Download" unless you are repairing a hard-bricked device, as this can erase critical IMEI and NVRAM data.

Like a scatter file, it defines the start address and size of every partition (e.g., preloader, boot, recovery, system) on the device. Open the SP Flash Tool v6 executable as

Many newer MediaTek devices use Secure Boot. You may need to load an Authentication File ( .auth ) by clicking "Choose" under the Authentication File option.

When loaded, it automatically maps the corresponding image files ( .bin , .img ) located in the same firmware folder to their respective slots in the tool. How to Use an XML File in SP Flash Tool v6 Browse to your firmware folder and select the flash

Click the "Download" button. Power off your device completely and connect it to the computer via USB. The tool should detect the device via the MediaTek VCOM drivers and begin the process.