1.   Syntax

wwt [option]... command [option|parameter|@file]...

2.   Features of wwt

• wwt can work with WBFS drives and partitions and with WBFS files. When creating plain WBFS files the tools try to create sparse files to reduce disk usage. Most commands accept multiple working WBFS to add, modify or extract more than one WBFS with one command.
• The working WBFS are defined by the options -part, --auto and --all. The option @--auto scanns all drives for valid WBFS partitionss.
• »wwt FORMAT« will format a WBFS partition or file. Together with option --recover it try to recover an already existing WBFS.
• »wwt LIST« list the discs of one ore more WBFS as a text table. Options like --long, --mixed, --unique, --no-header, --sections and more control the formating.

  Try the abbreviations »wwt LS«, »wwt LL«, »wwt LLL« or »wwt LM«.

• »wwt ADD« will add Wii discs in any file formats to one or more working WBFS. The options --update, --newer, --sync --ignore and many more controls the operation. Cloning of WBFS is done with this command too.

  »wwt ADD« can also read from extracted file system to compose a disc on the fly (like »wit COPY«). This functionality is also called »Partition builder« or »Disc builder«. trimble tsc3 user manual

  While adding a disc you can patch ID, disc title, IOS and region. Objects for patching are disc header, ticket, tmd and boot.bin. If necessary the partitions will be fake signed (trucha sign) automatically. Includes 8GB of internal memory, expandable via SDHC

• »wwt UPDATE« is a shortcut for »wwt ADD --update« and »wwt SYNC« for »wwt ADD --sync«.
• »wwt EXTRACT« will extract Wii discs and copy them to files in any file formats. If more then one working WBFS is set, each ISO image is searched in all working WBFS until found.
• »wwt REMOVE« will remove Wii discs from all working WBFS.
• »wwt VERIFY« verifies all ISO images of all working WBFS to find bad dumps. This is done by calculating the SHA1 checksums and comparing them with the stored checksums.
• The commands »wwt ANALYSE«, »wwt CHECK«, »wwt REPAIR« and »wwt RECOVER« can be used for analyzing, checking and repairing WBFS.
• »wwt CHECK« check the WBFS for different kinds of allocation errors. This check ist very fast (less than 1 second). All commands, which will modify the WBFS, do a silent check and report, if harmless errors found, or stop execution, if harmful errors found.
• »wwt DUMP« will print the data structures and information of WBFS partitionss and files. This is good for analysis.
• wwt (and also wit) supports time stamps for discs in WBFS containers like other file systems.
• For all commands working with Wii ISO images the options --include, --include-path, --exclude and --exclude-path setup up filters to decide which ISO images are used for the operation.
• The options --quiet and --verbose control the verbosity. Both option can be set multiple times to decrease or increase the verbosity.

Trimble Tsc3 User Manual -

Includes 8GB of internal memory, expandable via SDHC card or USB flash drive. First-Time Configuration Charging: Charge for at least 4 hours before the first use.

Connect the TSC3 to a PC. Older Windows versions require Windows Mobile Device Center (now replaced by the Trimble Mobile Manager on Windows 10/11). 🔧 Troubleshooting Common Issues 1. The "Frozen" Screen

Clean the gold contact pins on the bottom of the unit with rubbing alcohol. Check the charging brick for a green "ready" light.

Check for frequency interference from nearby high-voltage lines or other radio users. 3. Battery Won't Charge

The internal lithium-ion battery typically lasts 34 hours under normal conditions.

For robotic total stations, ensure the Radio Channel and Network ID on the TSC3 match the instrument. 📂 Data Management and Export

Confirm if you are working in International Feet, US Survey Feet, or Meters. Connecting to Instruments

To extend the life of your TSC3, follow these best practices:

Avoid leaving the controller on a vehicle dashboard in direct sunlight, as extreme heat can degrade the battery and screen adhesive.

If the TSC3 becomes unresponsive, perform a by holding the Power button for about 3 seconds until the countdown appears. If that fails, a Hard Reset is performed by holding the Power button for 15 seconds. 2. Radio Connection Dropping Check the internal radio antenna for cracks. Ensure you have a clear line of sight.

Includes 8GB of internal memory, expandable via SDHC card or USB flash drive. First-Time Configuration Charging: Charge for at least 4 hours before the first use.

Connect the TSC3 to a PC. Older Windows versions require Windows Mobile Device Center (now replaced by the Trimble Mobile Manager on Windows 10/11). 🔧 Troubleshooting Common Issues 1. The "Frozen" Screen

Clean the gold contact pins on the bottom of the unit with rubbing alcohol. Check the charging brick for a green "ready" light.

Check for frequency interference from nearby high-voltage lines or other radio users. 3. Battery Won't Charge

The internal lithium-ion battery typically lasts 34 hours under normal conditions.

For robotic total stations, ensure the Radio Channel and Network ID on the TSC3 match the instrument. 📂 Data Management and Export

Confirm if you are working in International Feet, US Survey Feet, or Meters. Connecting to Instruments

To extend the life of your TSC3, follow these best practices:

Avoid leaving the controller on a vehicle dashboard in direct sunlight, as extreme heat can degrade the battery and screen adhesive.

If the TSC3 becomes unresponsive, perform a by holding the Power button for about 3 seconds until the countdown appears. If that fails, a Hard Reset is performed by holding the Power button for 15 seconds. 2. Radio Connection Dropping Check the internal radio antenna for cracks. Ensure you have a clear line of sight.