Sanyo — Mac 1200 Autoclave Manual Updated

Never use tap water, as mineral buildup will damage the heating elements. 2. Loading the Chamber Place items in the stainless steel wire baskets.

Set the timer based on the load type (standard loads usually require 15–20 minutes). 4. Starting the Process Close the lid firmly and engage the locking handle. Press the "Start" button.

Allow liquid loads to cool significantly before removal to avoid "superheated" liquid eruptions. Maintenance and Troubleshooting sanyo mac 1200 autoclave manual

Before starting a cycle, ensure the unit is placed on a level, heat-resistant surface with adequate ventilation. 1. Water Filling Open the lid and remove the sterilization baskets. Pour distilled or deionized water into the chamber.

Set the sterilization temperature (usually 121°C for standard loads). Never use tap water, as mineral buildup will

Wipe the lid gasket with a damp, lint-free cloth to ensure a tight seal. Check the water level before every cycle. Monthly Maintenance

This guide provides a comprehensive overview of the Sanyo MAC 1200 autoclave, covering its operation, safety protocols, and maintenance requirements typically found in the user manual. System Overview Set the timer based on the load type

Since Sanyo’s medical division was integrated into Panasonic (PHCbi), official physical manuals are no longer in print. To find a digital copy for your records: Search the legacy archives.

Typically adjustable between 105°C and 126°C.