Technicians frequently use the LA-E801P Rev 2.0 schematic to resolve several recurring motherboard faults:
(also known by its CSL50/CSL52 design codes) typically features the following hardware:
Options for UMA (Integrated) or discrete GPU (AMD R17M-M1/M2) with dedicated DDR3L VRAM. lae801p rev 20 schematic better
Verify if 19V is passing through the first and second MOSFETs (e.g., PQA1).
For boards with failing discrete AMD GPUs, the Rev 2.0 schematic provides the necessary jumper and resistor configurations to disable the dedicated chip and force the system to use integrated Intel graphics. Why Revision 2.0 Matters Technicians frequently use the LA-E801P Rev 2
Managed by a complex sequence of VRM controllers, including dedicated regulators for +3VLP, +5VALW, and +3VALW. Common Issues & Troubleshooting Steps
Many "No Display" cases on the LA-E801P are resolved by flashing a fresh, tested BIOS binary. Why Revision 2
Ensure the 3.3V and 5V standby voltages are present. A common failure point on this board is the source side of the power-in MOSFETs showing unusually low resistance (e.g., 7Ω), which often indicates a short circuit in the downstream rail. No Display Issues: