Invt Che100 Inverter User Manualpdf › < SAFE >

Install in a well-ventilated area with an ambient temperature between -10°C and +40°C. Derating is required if the temperature exceeds 40°C. Critical Parameter Settings

The CHE100 series supports a wide range of power requirements and control modes:

Single-phase 220V, Three-phase 220V, and Three-phase 380V–440V. Invt CHE100 Inverter User Manualpdf

If the inverter stops, the LED display will show a fault code:

Setting these basic parameters is necessary for safe operation: Install in a well-ventilated area with an ambient

Sensorless Vector Control (SVC) for high precision and high torque at low speeds, and standard V/F control. Output Frequency: 0Hz to 400Hz. Starting Torque: 150% of rated torque at 0.5Hz (SVC mode).

Before starting, ensure the power has been disconnected for at least 5 minutes to allow capacitors to discharge. R, S, T: Terminals for 3-phase AC input. U, V, W: Terminals for 3-phase AC output to the motor. If the inverter stops, the LED display will

CHE Series Sensorless Vector Control Inverter Operation Manual