Hxc-fw-installer.hex __exclusive__ -
Update procedure. Strap the BOOT0 signal as shown on the above picture. Connect the Gotek to your PC with the USB A USB A cable. ( HxC bootloader installation - HxC2001
Once the .hex file is flashed, the drive is ready to receive the final HxC firmware ( .upd file) via a standard USB stick. Key Benefits of HxC Firmware Hxc-fw-installer.hex
To use the hxc-fw-installer.hex file, you typically need the following: Update procedure
You must often disable flash protection and erase the original factory firmware before adding and flashing the hxc-fw-installer.hex file. Hxc-fw-installer.hex
An STM32 or Artery AT32-based Gotek drive or clone.