Once you reach a "Fixed" solution status, use the "Point Survey" or "Topo Survey" icons to begin logging data.
Always start by creating a new project and selecting the correct Coordinate System . If you are working in a local grid, you will need to perform a Site Calibration (Control Point Alignment).
To ensure the longevity of your equipment, follow these manual-recommended tips: hitarget v30 plus manual
Select the appropriate (e.g., VRS or Nearest) to receive corrections. 3. Using Hi-Survey Road Software
Attach the rover to the range pole. Set its data link to "Internal UHF" and ensure the frequency and protocol (e.g., HI-TARGET or TRIMTALK) match the base exactly. Network RTK (NTRIP) Once you reach a "Fixed" solution status, use
If you aren’t using a base station, you’ll connect to a CORS network via the internet. Insert a SIM card into the controller or the receiver.
Ensure the UHF antenna is screwed on tightly and held vertically. In hilly terrain, an external radio (like the DDL-20) may be required for the base. To ensure the longevity of your equipment, follow
Periodically check the Hi-Target website for firmware updates to improve satellite tracking (especially for newer constellations like Galileo or BeiDou).
The software provides a graphical compass and distance indicators to lead you precisely to pre-loaded coordinates. 4. Maintenance and Best Practices
The V30 Plus features a simplified interface with status lights for Satellites, Bluetooth, Data Link (UHF/Network), and Power.