Foxconn Ml194v-0 Motherboard Manual May 2026

2 x DDR3 DIMM slots (Supports up to 16GB of DDR3 1066/1333/1600 MHz RAM). Expansion: 1 x PCIe x16 (for dedicated graphics). 1 x PCIe x1 (for smaller expansion cards).

Move the jumper cap from pins 1-2 (Normal) to pins 2-3 (Clear) for 10 seconds while the PC is off. Return the cap to pins 1-2 before restarting. FOXCONN ML194V-0 MOTHERBOARD MANUAL

Press F2 or Delete repeatedly during the initial splash screen to enter the BIOS setup utility. 3. Drivers and Support ITX Series of Motherboards User Manual 2 x DDR3 DIMM slots (Supports up to

If you are troubleshooting boot issues or hardware changes, these common Foxconn settings apply: Move the jumper cap from pins 1-2 (Normal)

LGA 1155 (Supports 2nd and 3rd Generation Intel Core i3, i5, i7, and Pentium processors). Chipset: Intel H61.

4 x SATA 2.0 or 3.0 ports (depending on specific revision). I/O Panel: Standard VGA, USB 2.0/3.0, and Gigabit Ethernet. 2. BIOS and Jumper Settings

To reset BIOS settings to factory defaults, locate the 3-pin jumper near the battery.