Flash Monotron 124 Manual -

Press (or the "D" button on some versions) to confirm and move to the next field. 2. Creating a Switching Program The Monotron 124 allows for multiple ON/OFF cycles per day: Access the programming mode by pressing the Prog button. Select an available program slot (P1 through P20).

This guide serves as an essential manual for owners and technicians, detailing the technical specifications, programming steps, and operational modes of the device. Technical Specifications

digital timer flash monotron 124 230V - 360.262 - Gastroparts flash monotron 124 manual

Understanding the hardware capabilities is critical for safe installation and optimal performance. 230V AC. Switching Capacity: 16A at 250V AC. Frequency: 50 Hz.

The default mode where the device follows the programmed schedule. It will automatically return to this mode if no buttons are pressed for 2 minutes. Press (or the "D" button on some versions)

Standard DIN-rail mounting with an operating temperature range of -10°C to +50°C. Core Programming Instructions

For each step, ensure the state (ON/OFF) is correctly assigned before saving. Operating Modes Select an available program slot (P1 through P20)

Press the (or designated menu key) until the display shows "P0" or flashes the hour digits. Use the + and - buttons to adjust the hours and minutes.

To ensure your schedule runs correctly, you must first synchronize the internal clock:

The focuses on setting the current time and defining specific switching "steps" or programs. 1. Setting the Current Time