접속자집계
- 오늘
- 101
- 어제
- 107
- 최대
- 436
- 전체
- 19,465
While the unit is off, press and hold the 'Store' button while switching the power on. The screen should indicate that it is waiting for a flash download.
Launch the DriveRack 260 Updater v161.exe . Select the correct COM port corresponding to your USB adapter.
📍 If you are using a 64-bit version of Windows 10 or 11, run the updater in "Compatibility Mode" for Windows 7 to ensure the driver handles the serial data stream correctly.
Click 'Update.' The process usually takes 3-5 minutes. Do not disconnect the cable or power down the unit during this window.
The DriveRack 260 uses an RS-232 interface. You will need a female-to-female null modem cable.
Since most modern laptops lack a DB9 port, a high-quality USB-to-Serial adapter (using the Prolific or FTDI chipset) is recommended.
Updates for the DriveRack 260 are rare, making the v1.610 release critical for users. This specific update focuses on:
Follow these steps to successfully deploy the v1.610 updater:
While the unit is off, press and hold the 'Store' button while switching the power on. The screen should indicate that it is waiting for a flash download.
Launch the DriveRack 260 Updater v161.exe . Select the correct COM port corresponding to your USB adapter.
📍 If you are using a 64-bit version of Windows 10 or 11, run the updater in "Compatibility Mode" for Windows 7 to ensure the driver handles the serial data stream correctly. driverack 260 updater v161 updated
Click 'Update.' The process usually takes 3-5 minutes. Do not disconnect the cable or power down the unit during this window.
The DriveRack 260 uses an RS-232 interface. You will need a female-to-female null modem cable. While the unit is off, press and hold
Since most modern laptops lack a DB9 port, a high-quality USB-to-Serial adapter (using the Prolific or FTDI chipset) is recommended.
Updates for the DriveRack 260 are rare, making the v1.610 release critical for users. This specific update focuses on: Select the correct COM port corresponding to your
Follow these steps to successfully deploy the v1.610 updater: