The chiller automatically adjusts the water temperature based on ambient room temperature. This is the default factory setting.
The CWFL-6000 utilizes the . Working Modes:
Allows the user to set a fixed temperature (ideal for environments with extreme temperature swings). How to Change Temperature Settings: Press and hold the "SET" button. Use the up/down arrows to navigate parameters. Adjust the value and press "SET" again to save. ⚠️ Common Alarm Codes cwfl-6000 manual
Up to 15kW depending on ambient conditions. Temperature Stability: ±1°C. Refrigerant: Environmentally friendly R-410a.
Use purified or distilled water. Fill until the water level reaches the green area of the gauge. Working Modes: Allows the user to set a
Verify that your local voltage matches the chiller’s requirements (typically 3-phase 380V). 📟 Control Panel & Operation
If you're looking for a digital copy of the manual or specific parts, let me know: Adjust the value and press "SET" again to save
The S&A Teyu CWFL-6000 is engineered to handle the intense heat of industrial fiber lasers. It features two independent cooling channels: Cools the laser optics and cutting head. Low-Temp Channel: Cools the fiber laser source. Technical Snapshot:
Replace the internal ion exchange filters and PP cotton filters to maintain water purity.
If your chiller starts beeping, check the display for these standard codes found in the : E1 Ultrahigh room temperature Improve ventilation or lower room temp. E2 Ultrahigh water temperature Check for clogged dust gauze or pump failure. E3 Ultralow water temperature Normal in winter; use a heater if necessary. E4 Room temp sensor failure Inspect sensor wiring or replace sensor. E5 Water temp sensor failure Check the probe connection. E6 Water flow alarm Check for kinked hoses or low water levels. 🧹 Maintenance Schedule