Bystronic Laser Error Code List //free\\ Today

Modern Bystronic lasers use sophisticated capacitive sensing to maintain the focal point:

These codes often relate to the "heart" of the machine. If the beam isn't generating correctly, look for these indicators:

Over 50% of cutting errors are solved by simply replacing a worn nozzle or a scorched lens. bystronic laser error code list

Verify gas regulator settings and check for leaks in the supply lines. Dirty lens or damaged ceramic part.

Many drive-related error codes disappear once the automatic lubrication system is refilled and the rails are wiped clean. When to Call Technical Support Dirty lens or damaged ceramic part

Often a sign of mechanical resistance, such as a lack of lubrication on the rails or a physical obstruction on the slats. 3. Cutting Head and Sensor Errors (The "ByPos" System)

If the chiller temperature deviates by even a few degrees, the resonator will shut down to prevent thermal damage. or Z-axis motors.

The machine stops because the nozzle touched the workpiece. This can be caused by "tipped" parts or incorrect "slug" management.

Bypass the surface-level alarm and look at the "Error History" log in the Bystronic software. This often shows a chain of events leading up to the stoppage.

Indicates a communication lag or hardware failure in the X, Y, or Z-axis motors.